XCP-ng 8.3 public alpha 🚀

exetico

@stormi Fair. Are there any public issue to follow? Maybe I didn't do my search that well? Thank you for the answer.

stormi

@exetico There are https://github.com/xcp-ng/xcp/issues/164 at XCP-ng level and https://github.com/xapi-project/xen-api/issues/4573 at upstream XAPI level.

ghost created this issue in xcp-ng/xcp

open Enable snapshots for VM with vUSB/USB passthrough #164

ghost created this issue in xapi-project/xen-api

open Backup fails if VM has a USB pass through #4573

JeffBerntsen

@stormi Update done on the 8.3 server in my test lab and all goes well so far. HP Microserver N36L

exetico

@stormi Thanks. I'll cross my fingers for a fix, at some time.

I also updated yesterday, on my ODROID H3+. Everything worked as expected.

I noticed that /etc/xensource/usb-policy.conf was send back to stock configuration, so I readded my modification to it. I'm not sure, if that's the expected behavior, after the host update + restart.

Thank you for the latest update .

Andrew

@stormi I have updated 8.3 machines, but they are only test machines. I also did a fresh 8.3 install and update. Working as usual.

gskger

@stormi No problem with a rolling pool update of my two playlab host. Pool reports up-to-date and healthy (XO from source). Basic VM and VDI tasks work as expected. Looking good

ravenet

@stormi No issues so far on Ryzen 1700x, Xeon e5-2640v3, and 2 Epyc 7313P systems

Anonabhar

Updated my HP DL360 G7 home lab with no problem at all.. Everything seems to work OK.. 8-)

stormi

@exetico said in XCP-ng 8.3 public alpha :

@stormi Thanks. I'll cross my fingers for a fix, at some time.

I noticed that /etc/xensource/usb-policy.conf was send back to stock configuration, so I readded my modification to it. I'm not sure, if that's the expected behavior, after the host update + restart.

Yes, it is. I opened this upstream issue about it, but no common decision was reached yet: https://github.com/xapi-project/xen-api/issues/4935

stormi created this issue in xapi-project/xen-api

open Packaging: xapi-core RPM updates overwrite custom user config in usb-policy.conf #4935

Strebor

No problems here updating a testpool with 2x NUC11TNHi5 (i5-1135G7 and I225-LM 2.5GB NIC)
Updated both from shell, rebooted master first, then the other NUC.

steff22

anyone tried to install on asus pn52?

struggling with the network not working. is bad speed without guest tolls not installed and with installed Xcp-ng tools 8.2.2.200 the network hangs and does not exist same with xen guest tools

stormi

I pushed a few updates to the xcp-ng-base repository. Update with yum update or Xen Orchestra.

Changes:

xcp-ng-release* mostly changes for the imminent new release of installer images
openvswitch: fix DoS security issue, CVE-2023-1668
xcp-ng-xapi-plugins: enable installing new packages from Xen Orchestra, and also applying updates from the xcp-ng-linstor repository. This is preliminary work for XOSTOR support in XCP-ng 8.3.
zstd updated to 1.5.5, which is a bugfix release.

steff22

@stormi ok, installing the patch didn't help the network speed.

Are probably the drivers for the RTK8125B with which there are some bugs. I get full speed when I install Windows 10 on the Asus PN52.

steff22

@steff22 Are the guest tools that have support for Xcp-ng 8.3 ?

CptHyper

@olivierlambert Any plans to support this for manual snapshots as well ? If required we could add [NOSNAP] as well to have an option.

olivierlambert

@CptHyper I'm not sure to understand what are you talking about. Can you be more specific?

stormi

@steff22 said in XCP-ng 8.3 public alpha :

@steff22 Are the guest tools that have support for Xcp-ng 8.3 ?

XCP-ng 8.3 does not require a change in the guest tools.

CptHyper

@olivierlambert sure, i mean the possibility to exclude disks from Snapshots. You said its only possible if the snapshot is triggered by an Backup job, but i think this would be useful as well for manual snapshots or ones triggered by the API. A separate (additional) naming [NOSNAP] would make sure people have to opt in.

stormi

We just released XCP-ng 8.3 beta 1 !

I opened a new thread for us to discuss it and for you to provide feedback: https://xcp-ng.org/forum/topic/7464/xcp-ng-8-3-beta

Thanks for all the feedback already provided here, and see you on this new thread!

In order not to miss anything (and, let's be honest, for me to be sure that messages on the new thread reach you all), the best course of action is: open the new thread right now and use the "watch" button.

And let's answer this common and legitimate question: how to upgrade from alpha to beta ? Well, there's nothing to do, just update as usual. In fact, you might already be in beta state. However, as indicated in the blog post, we need a lot of testing of the installer, so it's also an option to start from the installation ISO again.