Backup error with space available

Bane

@olivierlambert

When I run the below, I get destination 'xen-orchestra' already exisits.

git clone -b latest https://github.com/vatesfr/xen-orchestra

I'm not an expert so forgive me if this seems like a basic question.

olivierlambert

If you use XOA, then you just have to click on "Update" by using the "latest" release channel. No command line.
If you use XO from the source, then please follow the instructions: https://xen-orchestra.com/docs/installation.html#fetching-the-code

Bane

@olivierlambert

Ok, after updating now the backup fails with with:

SESSION_AUTHENTICATION_FAILED(root, Authentication failure)

I can log into the xcp-ng server with root from the XOA VM. So, I don't understand what is taking place here.

olivierlambert

Are you sure about the password? This error is clearly an auth issue

Bane

@olivierlambert

I deleted my server out and re-added it. I no longer have the authentication error. So back to the backup...

Bane

@olivierlambert

I still have HTTP timeouts on the backup. The quantity is less however.

Danp

@Bane Have you tried increasing the timeout length?

Bane

@Danp

Yes, that has been done. The most recent builds Olivierlambert suggested have reduced the issue, just not fixed it completely.

Danp

@Bane Sorry if I wasn't clear. I meant to further increase it from the initial solution provided. What happens if you change 1800000 to 3600000?

Bane

@Danp I've doubled it and I'm retrying the backup.

Bane

It looks like changing the time out to 60 minutes has fixed my backup issue. So, the next question.

Is it possible to restore the VM backups to a different install of XCP-NG? I have a single XCP-NG server and would like to re-install XCP-NG and set it up for XCP to be on smaller hard drive and all my VM storage to be on a ZFS RAIDZ1.

olivierlambert

That's one great thing about virtualization and XO backup: it doesn't matter where do you restore your backups. Doesn't matter in terms of hardware, storage, network.

You can restore all your backup on freshly installed machines or old stuff, regardless what's inside.

Bane

@olivierlambert

Where would the timeout fix be applied in community edition? There is not a /etc/xo-server directory.

Thanks,

Bane

@olivierlambert I'm also trying to restore the VM's that were successfully backed up. I have two that fail to restore and give the error:

IMPORT_ERROR_PREMATURE_EOF()

What can I do to determine what this failure means? I found a previous entry about disk space, but I do not have any disk usage issues that I can see.

Filesystem          Size  Used Avail Use% Mounted on
devtmpfs            2.8G   12K  2.8G   1% /dev
tmpfs               2.8G  268K  2.8G   1% /dev/shm
tmpfs               2.8G   10M  2.8G   1% /run
tmpfs               2.8G     0  2.8G   0% /sys/fs/cgroup
/dev/nvme0n1p1       18G  1.9G   15G  12% /
xenstore            2.8G     0  2.8G   0% /var/lib/xenstored
/dev/nvme0n1p5      3.9G   83M  3.6G   3% /var/log
/dev/nvme0n1p4      512M  3.0M  509M   1% /boot/efi
tmpfs               571M     0  571M   0% /run/user/0
tank                4.3T  256K  4.3T   1% /tank
tank/local-store    4.3T   17G  4.3T   1% /tank/local-store
//192.168.2.15/iso   22T   15T  6.5T  70% /run/sr-mount/39ac011c-a02a-d9bb-0fef-7fffebbefacc

Thanks

olivierlambert

It's not a fix, it's just a workaround. It's not normal to have this kind of timeout
IMPORT_ERROR_PREMATURE_EOF() means the backup is maybe incomplete or import stalled

Bane

@olivierlambert

Is there anyway to determine whether it's a failed backup or stalled import? Is there anything that can be done to correct a stalled import? I assume there is nothing that can be done for it if it's a failed backup..

Also interesting is that the restores that fail are listed with a number instead of the VM name.

xcp-ng restore error.png

olivierlambert

It's really hard to tell without being inside the infrastructure

Bane

@olivierlambert

Any logs inside XCP-NG that I can look at? I've resigned myself to the fact that I will have to rebuild the two VM's that won't import, but I'd like to prevent a similar situation in the future.

olivierlambert

Are you using XOA or XO from the sources? In any case, be sure you be entirely up to date (on latest or latest commit)

Bane

@olivierlambert

I have both installed to try out community. I am performing the restore from XOA, the same console I used for the backups.

Incidentally, I would pay for the XOA, but $70 a month to get back up for my home lab is a bit pricy, I only have one server. You guys might consider offering a paid version with backup that maybe doesn't include premium support for a reduced price. I can't speak for anyone else, but I would be willing to pay for something like that, to have a turnkey solution with easy updates and backup.