XO task watcher issue/CR broken
-
@julien-f
I'll tested in a short time, I am in the middle of CR for next 6 hours -
@julien-f Broken. Job failed. Lots of
Error: Premature close. Data not replicated.Job report: job.txt (text format)
Journal XO output: out.txt.gz (GZ format).
-
-
I still don't understand exactly the issue, not sure if it comes from XO or XCP-ng/XenServer, but latest version does integrate a work-around, if you encounter Premature close error during CR, you can add the following to your xo-server's configuration file (usually
/etc/xo-server/config.toml) :[xapiOptions] ignorePrematureClose = trueIt's not enabled by default until completely understand the root cause and it's properly fixed.
@Gheppy Thanks a lot for your tests and feedbacks
@Andrew Thank you very much for the test appliance, it was an invaluable help investigating this. If you can keep it online for the time being I'll probably have further tests to do with it next week
-
@julien-f I updated XO Source to current master and added the new ignorePrematureClose=true option. Backup ran the CR correctly again.
Yes, I can leave the XOA test tunnel up for testing. I'm happy to help you help me!
-
@Andrew do you still have the issue without the
ignorePrematureClose? -
@olivierlambert Yes. Still problems on the new code without the option set. 90% of the VMs fail 10% finish correctly on CR.
-
Thanks for your precious feedback
-
Just for info
I installed the latest version of XOCE, commit 083db67df9e1645a2f8fe2fac564b3aecf30d55e
CR is ok and can be used in case of disaster, with ignorePrematureClose = true.
I managed to start the VM without problems, the VM itself ( that is the CR copy ) .
At the moment I have a very slow copy problem of the VM that is created with CR on the seccond server ( 18Mb max ), the problem is that the same connection goes with 400Mb for a CR copy. I want to make a copy of VM-CR and start it -
G Gheppy referenced this topic on
-
@Gheppy weird.. DR is now working for me but CR is still never ending
-
@magicker
You need to add this on config file.
Location for me is /opt/xen-orchestra/packages/xo-server/.xo-server.toml[xapiOptions] ignorePrematureClose = true -
@Gheppy Yes.. putting that in place seemed to fix DR.. but not CR.
-
Any log or something @magicker ? Are you sure it's a CR started after modifying the config and restarting xo-server? -
@olivierlambert actually.. just tried CR again... and this time it is working.. will test with a few more vms.
-
@olivierlambert spoke too soon.. CR works in one direction but not the other
https://images.dx3webs.com/kgSC4E.png -
@magicker Any differences between the two hosts? XCP-ng versions maybe?
-
Jumping in as another "victim"... I have lost almost all ability to run any kinds of backups.
System information:
XO from Sources
XO-Server: 5.109.0
XO-Web: 5.111.0
Commit: d4bbfI had no issues running any kinds of backups prior to applying the latest commits two weeks ago, Monday, February 6, 2023. After applying that commit, everything seemed to be OK until late that evening. At that time, one of my CR jobs started and never completed. All of the subsequent jobs failed, of course, because another job was already running. I was able to delete the job and restarted the toolstacks and rebuilt a new job. This started to spread until, eventually, all of my CR jobs would fail. That issue has now spread and my DR jobs are now failing, too. Out of the seven backup jobs that were working with no issues prior to that date, I am now only able to run one job successfully, and that is a DR job.
The DR and CR jobs are written to different repositories (the CR jobs are written to the storage repository on one of the other XCP-ng servers and the DR jobs are written to an NFS share).
I tried running the cr-issue branch update that @julien-f recommended, and modified my config.toml file with the ignorePrematureClose = true code that was also recommended. Nothing works.
If I try to run a DR job now, even a brand-new one, it looks like it wants to start and create the snapshot, but then fails and actually shows it will start in 53.086 years.
Anything I can get, just let me know what to pull and I'll add it here... hopefully that will help. Right now, I'm able to only back up a single VM!
-
@JamfoFL
cr-issuewas a test branch that I've just removed, please try onmaster. -
@julien-f OK... I just updated again and there's no change.
It certainly looks like a snapshot is created (I see one attached to the VM right now), but nothing ever progresses. Right now, the job is listed with this status:
[XO] Exporting content of VDI VXCTEST-22-02 Primary (on XCPHOST1) 0%
It's been there for about 10 minutes. I will allow this to continue to run to see if there's ever any progress... but this is usually where thigs jam up and the job never completes.
-
@JamfoFL If you can find the latest commit on which it worked for you, that would be very helpful
One way that you could find the correct commit without checking out every one of them is to use a binary search with
git bisect.First you need to find an older commit that did not exhibit the issue, then you can start the search:
# Move to XO directory cd xen-orchestra # Ensure you are up-to-date on `master` git checkout master git pull --ff-only # Tell git to start the search git bisect start # Current version is bad git bisect bad # Tell git which commit was good git bisect good <commit id> # Now that git knows the good and the bad commit, it will select a commit to testTesting a commit:
# Re-install dependencies and rebuild XO yarn; yarn build # Run xo-server ./packages/xo-server/dist/cli.mjs # Test XO to see if it has the problem # Interrupt xo-server with Ctrl+C # If the problem is present: git bisect bad # If the problem is absent: git bisect good # Continue testing commits until git tells you which commit is the first with the problem, example: # # Bisecting: 0 revisions left to test after this (roughly 0 steps) # [31f850c19c2c2ad5054c292d0f22e9237869dc04] fix(xo-server-transport-email): log async errorsAfter the search, to go back to the initial state:
git bisect reset
