XCP-ng
    • Categories
    • Recent
    • Tags
    • Popular
    • Users
    • Groups
    • Register
    • Login

    XCP-ng 8.3 betas and RCs feedback 🚀

    Scheduled Pinned Locked Moved News
    792 Posts 89 Posters 1.3m Views 69 Watching
    Loading More Posts
    • Oldest to Newest
    • Newest to Oldest
    • Most Votes
    Reply
    • Reply as topic
    Log in to reply
    This topic has been deleted. Only users with topic management privileges can see it.
    • S Offline
      steff22 @stormi
      last edited by

      @stormi yes, it seems that way. oh is that such a shame since the Asus pn52 has an AMD Ryzen 9 5900HX 8 cores/16 threads 3.3ghz cpu and up 64 gb ram

      A 2 Replies Last reply Reply Quote 0
      • A Offline
        Andrew Top contributor @steff22
        last edited by

        @steff22 My main home server is an Asus PN63-S1, but that's Intel i7 and i225 ethernet. It's a nice box (for an Intel). I like it for the dual M.2 NVMe so I can mirror my internal data, which has already saved me from Kingston NVMe failure.

        I also have an ASRock 4X4 BOX-5600U with the 8125 and it works correctly. I just did a quick NFS read test (using dd) and get 115MBytes/sec (connected to 1G switch). I'll have to move it to the 2.5G switch and see what I get. There have been some reports (in general, not specific to this setup) of issues when using 2.5G connections.

        I will build a new driver with the updated code form Realtek and see how it works.

        S 1 Reply Last reply Reply Quote 1
        • A Offline
          Andrew Top contributor @steff22
          last edited by

          @steff22 I tested the stock 8125 driver again on my ASRock AMD system and I have full read and write speed at 1G and 2.5G with native access and VLANs... I'll still try a driver update.

          1 Reply Last reply Reply Quote 0
          • G Offline
            gsrfan01
            last edited by

            Not sure if this is related to 8.3 quite yet, but having trouble joining a newly installed 8.3 beta server into a pool that was started from 8.3 alpha and updated.

            Attempting to add the new host generates this error POOL_JOINING_HOST_TLS_VERIFICATION_MISMATCH which I only see a single other reference to mentioning CPU settings which as far as I can tell match between the 2 hosts.

            G psafontP 2 Replies Last reply Reply Quote 1
            • S Offline
              steff22 @Andrew
              last edited by

              @Andrew now see that I also get 118MBytes/sec (connected to 1G switch.

              But I don't have a dedicated 2.5 switch. So it is connected to a 10G switch with rj45 sfp+ module which steps down to 2.5g. This solution worked perfectly in windows 10 with full 2.5G both directions on the same Asus pn52 with CrystalDiskMark over smb I got Sequential reed 0.42 MB/s and Write 292.80 MB/s with Xcp-ng win 10 vm

              S 1 Reply Last reply Reply Quote 0
              • S Offline
                steff22 @steff22
                last edited by

                @steff22 is one of these in the Asus pn52 RTL8125B-CG or Realtek® RTL8125BG-CG, by the way. is it standard RTL8125 even if it is B-CG or BG-CG

                S A 2 Replies Last reply Reply Quote 0
                • S Offline
                  steff22 @steff22
                  last edited by

                  By the way, is there a built-in driver for the Dell S140 in Xcp-ng?

                  Too bad write speed on a Dell poweredge R440 with Samsung 860 evo ssd all the way down to 150MB/s write speed. The same ssd in a regular PC with Xcp-ng gave 560MB/s

                  1 Reply Last reply Reply Quote 0
                  • A Offline
                    Andrew Top contributor @steff22
                    last edited by

                    @steff22 Let's continue the 8125 issue on your other network thread as it not directly a 8.3 beta problem.

                    1 Reply Last reply Reply Quote 1
                    • G Offline
                      gsrfan01 @gsrfan01
                      last edited by

                      @gsrfan01 Follow up to this

                      Turns out the existing pool has it sent to false while the new one was set to new

                      New

                      [17:06 prod-hv-xcpng02]# xe host-param-list uuid= 
...
tls-verification-enabled ( RO): true
[17:06 prod-hv-xcpng02]# xe host-param-list uuid= 
tls-verification-enabled ( RO): true

                      Old

                      [17:06 prod-hv-xcpng02]# xe host-param-list uuid= 
tls-verification-enabled ( RO): false
[17:07 prod-hv-xcpng01]# xe pool-param-list uuid= 
tls-verification-enabled ( RO): false

                      Solution

                      Ended up running xe pool-enable-tls-verification and xe host-emergency-reenable-tls-verification on the existing server and was then able to get the new server added to the pool.

                      I was able to find very little documentation on these commands so I'm crossing fingers emergency-reenable-tls-verification doesn't cause any issues down the line but all seems good so far.

                      stormiS 1 Reply Last reply Reply Quote 2
                      • R Offline
                        rRobbie
                        last edited by

                        Hello there 😊

                        Just updated from 8.3 alpha (updated to the latest patches) to 8.3 beta using XOA on a Intel NUC11ATKC4 and a Intel NUC8i5BEH.

                        All went well, great job and so far super stable.

                        Thank You
                        RP

                        R 1 Reply Last reply Reply Quote 2
                        • R Offline
                          rRobbie @rRobbie
                          last edited by rRobbie

                          @rRobbie

                          I quote myself to report a small issue, after the reboot following the upgrade to beta one VM did not auto power on-
                          When I realized some services were not available I went and started the VM myself.

                          Capture.PNG

                          The other two VM with auto power on switch did power on without issues.

                          Let me know if I can provide any other info.
                          RP

                          1 Reply Last reply Reply Quote 0
                          • olivierlambertO Offline
                            olivierlambert Vates 🪐 Co-Founder CEO
                            last edited by

                            @rRobbie can you disable/re-enable the "Auto power on" toggle, reboot and see if it works?

                            If it doesn't, if the problematic VM is hosted on a storage repository that's inside a VM on the same host? (could be a "dependency" auto boot issue)

                            R 2 Replies Last reply Reply Quote 0
                            • stormiS Offline
                              stormi Vates 🪐 XCP-ng Team @gsrfan01
                              last edited by

                              @gsrfan01 said in XCP-ng 8.3 beta 🚀:

                              Not sure if this is related to 8.3 quite yet, but having trouble joining a newly installed 8.3 beta server into a pool that was started from 8.3 alpha and updated.

                              Attempting to add the new host generates this error POOL_JOINING_HOST_TLS_VERIFICATION_MISMATCH which I only see a single other reference to mentioning CPU settings which as far as I can tell match between the 2 hosts.

                              It is definitely an interesting finding. It would be worth testing whether this will happen in final release when upgrading a 8.2 pool to 8.3 (will this flip the setting to True automatically or keep as False?) and then trying to add a freshly installed 8.3 member to the existing pool.

                              If the tests show users of the final release, upgrading from 8.2 and then adding new hosts, may encounter the same issue, we'll have document this clearly in the 8.3 release notes.

                              By the way, was your pool initially ugraded from 8.2 to 8.3 alpha, or was it directly installed with 8.3 alpha?

                              Many thanks for your investigation and feedback! I'm creating a card in our kanban to keep track of this.

                              @gsrfan01 said in XCP-ng 8.3 beta 🚀:

                              Solution

                              Ended up running xe pool-enable-tls-verification and xe host-emergency-reenable-tls-verification on the existing server and was then able to get the new server added to the pool.

                              I was able to find very little documentation on these commands so I'm crossing fingers emergency-reenable-tls-verification doesn't cause any issues down the line but all seems good so far.

                              This is indeed a pending task: documenting the new TLS verification feature. Citrix Hypervisor Cloud (8.3) once had a pre-release documentation available, then it was taken down when they canceled the Citrix Hypervisor Cloud preview and renamed it XenServer 8 Stream.

                              G 1 Reply Last reply Reply Quote 1
                              • G Offline
                                gsrfan01 @stormi
                                last edited by

                                @stormi I was originally fairly confident it was fresh from 8.3 Alpha but can't recall with 100% certainty if it wasn't an in-place upgrade from 8.2.

                                Is there anything in the file system I can check to see if it was a fresh install or an upgrade?

                                1 Reply Last reply Reply Quote 0
                                • M Offline
                                  moussa854
                                  last edited by

                                  How to add vTPM in Xen Orchestra?

                                  I have XCP-ng 8.3 beta and XOA 5.83.3

                                  stormiS C 2 Replies Last reply Reply Quote 0
                                  • olivierlambertO Offline
                                    olivierlambert Vates 🪐 Co-Founder CEO
                                    last edited by

                                    It's not exposed yet in the web UI.

                                    1 Reply Last reply Reply Quote 0
                                    • stormiS Offline
                                      stormi Vates 🪐 XCP-ng Team @moussa854
                                      last edited by

                                      @moussa854 You can create a vTPM with xe vtpm-create vm-uuid=UUID_OF_YOUR_VM.

                                      M 1 Reply Last reply Reply Quote 0
                                      • C Offline
                                        cocoon XCP-ng Center Team @moussa854
                                        last edited by

                                        @moussa854
                                        And after adding it you might need some more prep? I have had no time to try more:

                                        https://xcp-ng.org/forum/topic/6578/xcp-ng-8-3-public-alpha/121?_=1687790268385

                                        1 Reply Last reply Reply Quote 0
                                        • M Offline
                                          moussa854 @stormi
                                          last edited by moussa854 

                                          xe vtpm-create vm-uuid=UUID_OF_YOUR_VM

                                          was enough to enable the vTPM in my case. Thank you so much.

                                          15e98721-1da8-4a90-aa34-73d2d29949cd-image.png

                                          1 Reply Last reply Reply Quote 1
                                          • R Offline
                                            rRobbie @olivierlambert
                                            last edited by

                                            This post is deleted!
                                            1 Reply Last reply Reply Quote 0
                                            • First post
                                              Last post