Add Management Interface

olivierlambert

But you can already add an IP to an interface in Xen Orchestra I'm sure I'm missing something obvious

dredknight

@olivierlambert I was just trying to describe it better. If that is the case then all is good.

KPS

@olivierlambert said in Add Management Interface:

But you can already add an IP to an interface in Xen Orchestra I'm sure I'm missing something obvious

That is exactly my problem: I do not find a possibility to add an ip address to an interface. I can only change the IP of a management interface, that is already there...

olivierlambert

In the host view, Network tab, in each row you have eth0, eth1 etc.
Click on the "None" in the row "Mode".
Profit.

KPS

@olivierlambert
Thank you very much! I just did not bring that option to my demand...

Sorry for the confusion!

olivierlambert

No worries, the UI isn't clear at all and we are aware of it.

So what's left that you don't have in XCP-ng Center after this?

KPS

Hi!

I was now able to solve both issues (thank you @olivierlambert):

Adding additional Management Interface:
--> XOA - Host - Network - Change Type to "static"
Moving Management Interface to Bond:
--> XOA - Pool - Network - Create Bond with "old" single-Interface and another interface
----> IP is automatically reassigned to Bond

Gheppy

One more question.
How to change Management, let's say, on eth3. In the image below.

Andrew

@Gheppy @olivierlambert You can do it from XCP directly. Look at this post #4671. There is a menu option on the XCP console or using xsconsole from the XCP shell. You should reboot after changing the management interface.

Gheppy

@Andrew
I know about xsconsole, I thought there was something like that in XO as well as in the mentioned post where XCP-ng Center is used for this.

Andrew

@Gheppy I think the change of management interface and change MTU are missing features that are available from the CLI or the old XCP-ng Center and should be supported in XO (right @olivierlambert ? SVP).

olivierlambert

Yes it will