Slow backups (updated XO source issue)

olivierlambert

Adding @florent in the loop

julien-f

@Andrew I'm surprised because I have done a lot of tests to ensure the impact would be minimal.

You can disable this check by setting the following entry in your xo-server/xo-proxy config:

[backups.vm.defaultSettings]
validateVhdStreams = false

If you can it would be interesting if you could provide the duration of the backup job and the CPU usage on your XO appliance with and without the validation.
And please also provide the transferred size of the backup to ensure the difference does not come from here (an error I could very likely make ^^)

Also, we've just removed some other checks which where no longer necessary with this change: https://github.com/vatesfr/xen-orchestra/pull/6773

julien-f opened this pull request in vatesfr/xen-orchestra

closed Revert "feat(backups/writeVhd): check file has expected size (#6703)" #6773

Andrew

@julien-f Normally (before the issue) the CR run takes about 8-9 minutes and transfers about 10-15GiB. After the config change it has been taking longer 12-15 minutes but is transferring more data 30-35GiB. I'll have to let it run a few more hours to see if the data size (and time) gets back to normal.

I have been getting a lot of errors (xcp7 is the destination of the CR) too:

root@xcp7 Xapi#putResource /import_raw_vdi/ Error [ERR_STREAM_PREMATURE_CLOSE]: Premature close
    at new NodeError (node:internal/errors:399:5)
    at ClientRequest.onclose (node:internal/streams/end-of-stream:154:30)
    at ClientRequest.emit (node:events:525:35)
    at ClientRequest.patchedEmit [as emit] (/opt/xo/xo-builds/xen-orchestra-202304161246/@xen-orchestra/log/configure.js:52:17)
    at TLSSocket.socketCloseListener (node:_http_client:465:9)
    at TLSSocket.emit (node:events:525:35)
    at TLSSocket.patchedEmit [as emit] (/opt/xo/xo-builds/xen-orchestra-202304161246/@xen-orchestra/log/configure.js:52:17)
    at node:net:322:12
    at TCP.done (node:_tls_wrap:588:7)
    at TCP.callbackTrampoline (node:internal/async_hooks:130:17) {
  code: 'ERR_STREAM_PREMATURE_CLOSE'
}

julien-f

@Andrew This change should absolutely not change the transferred size, let's see how the future runs go

Andrew

@julien-f The time it takes for CR to run seems to be back to normal with the added config

[backups.vm.defaultSettings]
validateVhdStreams = false

I have Concurrency set to 4.

There's more than enough local ethernet bandwidth between machines and XO is running on the pool master. There's lots of cores and memory for XO. But with validateVhdStreams = true there seems to be some single threaded issues with node because it uses 90%-120% cpu.

With validateVhdStreams = false the CPU usage is about 110%-150%, so still some single threaded issues but a lot less as node is able to use more than one core (but not all of them).

Also... I see the warning that appeared from an earlier commit but does not cause problems:

 transfer
 Suspend VDI not available for this suspended VM

julien-f

@Andrew The suspend VDI warning is a bug introduced by https://github.com/vatesfr/xen-orchestra/pull/6774

It has no consequences except from this message, I'll fix it ASAP

julien-f opened this pull request in vatesfr/xen-orchestra

closed fix(backups): restore VM with memory as suspended #6774

Gheppy

I had the same problem. I have a CR that until applying the setting took up to 5 days (I interrupted the backup to see where the problem is) to make a backup, now with the setting it takes 12 hours.
But the stability of the transfer is better by at least 15% compared to commit afadc8f95adf741611d1f298dfe77cbf1f895231.

@Andrew said in Slow backups (updated XO source issue):

@julien-f The time it takes for CR to run seems to be back to normal with the added config
[backups.vm.defaultSettings]
validateVhdStreams = false
I have Concurrency set to 4.

There's more than enough local ethernet bandwidth between machines and XO is running on the pool master. There's lots of cores and memory for XO. But with validateVhdStreams = true there seems to be some single threaded issues with node because it uses 90%-120% cpu.

With validateVhdStreams = false the CPU usage is about 110%-150%, so still some single threaded issues but a lot less as node is able to use more than one core (but not all of them).

Also... I see the warning that appeared from an earlier commit but does not cause problems:
 transfer
 Suspend VDI not available for this suspended VM

julien-f

@Andrew https://github.com/vatesfr/xen-orchestra/commit/136718df7e28d63f340c700564e5c1a90d1bf05e

Regarding the perf issue, I will work on it as soon as I'm able to reproduce on my side

If the impact is too big, we'll disable it by default…

0

julien-f committed to vatesfr/xen-orchestra

fix(backups/importDeltaVm): handle `suspend_VDI === 'OpaqueRef:NULL'`

Fixes https://xcp-ng.org/forum/post/61169

Introduced by 4d55c5ae4

Gheppy

From what I've seen:

when nothing is set, XOCE makes the transfer using a single vCPU to the maximum and the rest up to 5% max . The maximum transfer being up to 23Mb/s
when the setting exists, XOCE uses all 12 vCPUs between 30% and 45%. The transfer is between 145Mb/s and 350Mb/s.

In both cases, the transfer is done on a 10Gib LAN and I use http mod for connecting to Servers

olivierlambert

Hmm this points to a concurrency issue with the backup workers

Gheppy

This is on testing environment.
Version of XOCE

Transfer without setting

Transfer with setting

olivierlambert

That's indeed very different. Out of curiosity, what's the CPU model?

Gheppy

Intel(R) Xeon(R) CPU E5-2620 v3 @ 2.40GHz

sluflyer06

I too noticed by backup times went sky high recently. I just made the suggested switch in the config and that is the difference between before/after. My box has 2x E5-2697a v4 processors.

julien-f

I've disabled the VHD stream validation by default for now: https://github.com/vatesfr/xen-orchestra/commit/0444cf0b3bc6902fc1a995da5cf29474b7f4f167

We'll re-enable it when we'll find a better solution.

Thank you all for your reports

0

julien-f committed to vatesfr/xen-orchestra

fix(backups): disable VHD stream validation by default

Introduced by 68b2c287e

Fixes https://xcp-ng.org/forum/post/61118

Current code is too heavy on the main thread, disable by default until a better solution is fixed.

Andrew

@julien-f Thanks. I updated to 0444cf0 and CR times are normal again (as expected).