Add Management Interface

[dredknight]

@livierlambert I was just trying to describe it better. If that is the case then all is good.

[KPS]

@livierlambert said in Add Management Interface:

But you can already add an IP to an interface in Xen Orchestra I'm sure I'm missing something obvious

That is exactly my problem: I do not find a possibility to add an ip address to an interface. I can only change the IP of a management interface, that is already there...

[olivierlambert]

1. In the host view, Network tab, in each row you have eth0, eth1 etc.
2. Click on the "None" in the row "Mode".
3. Profit.

[KPS]

@livierlambert
Thank you very much! I just did not bring that option to my demand...

Sorry for the confusion!

[olivierlambert]

No worries, the UI isn't clear at all and we are aware of it.

So what's left that you don't have in XCP-ng Center after this?

[KPS]

Hi!

I was now able to solve both issues (thank you @livierlambert):

• Adding additional Management Interface:
  --> XOA - Host - Network - Change Type to "static"

• Moving Management Interface to Bond:
  --> XOA - Pool - Network - Create Bond with "old" single-Interface and another interface
  ----> IP is automatically reassigned to Bond

[Gheppy]

One more question.
How to change Management, let's say, on eth3. In the image below.

[Andrew]

@heppy @livierlambert You can do it from XCP directly. Look at this post #4671. There is a menu option on the XCP console or using xsconsole from the XCP shell. You should reboot after changing the management interface.

[Gheppy]

@ndrew
I know about xsconsole, I thought there was something like that in XO as well as in the mentioned post where XCP-ng Center is used for this.

[Andrew]

@heppy I think the change of management interface and change MTU are missing features that are available from the CLI or the old XCP-ng Center and should be supported in XO (right @livierlambert ? SVP).

[olivierlambert]

Yes it will