Subcategories

  • VMs, hosts, pools, networks and all other usual management tasks.

    427 Topics
    3k Posts
    P
    In case anyone wonders how this played out. At the end of the day, I shutdown the host with the running workloads on it, kept it at BIOS boot so the 8.3 installer would upgrade it cleanly, and then booted it back up. For reasons related to my particular setup, the down time was more than 60 minutes. But that's not related to XCP-ng. The XCP-ng installer was maybe 10 of that. 20 of that was 3 reboots on a server that takes ages to boot. One thing that is a bit difficult is that the 8.3 installer doesn't notice ZFS volumes or help with ZFS. So after the upgrade, I have to follow a modified set of these instructions (modified because the package names have changed over time) to install ZFS and its components into the system. So the sequence is: Shutdown Install via ISO Reboot to single user mode Run yum update to pull in all the updates Run the ZFS commands to install ZFS on the host Reboot again Run normally Of course, I ended up rebooting more than just those 2 times, because I forgot that I would need to install ZFS (even though I did it on 2 different hosts already ) So now the pool is fully upgraded, everybody is happy. I'm now working on creating shared storage across the nodes. It's amateur hour over here. I appreciate all the help.
  • ACLs, Self-service, Cloud-init, Load balancing...

    97 Topics
    818 Posts
    olivierlambertO
    October release fixed it
  • All XO backup features: full and incremental, replication, mirrors...

    440 Topics
    4k Posts
    DanpD
    @john.c said in "NOT_SUPPORTED_DURING_UPGRADE()" error after yesterday's update: Please be careful of tenses (past tense etc), Yeah... I was trying to be helpful, but I was clearly in too much of a hurry. Mea culpa
  • Everything related to Xen Orchestra's REST API

    75 Topics
    571 Posts
    F
    @MathieuRA Thank you, perfect Br,
  • Terraform, Packer or any tool to do IaC

    45 Topics
    427 Posts
    CyrilleC
    Terraform provider release v0.37.0 Enables the secure boot parameter for the VM resource Terraform provider release: https://github.com/vatesfr/terraform-provider-xenorchestra/releases/tag/v0.37.0
  • Install pool-patches fails

    6
    0 Votes
    6 Posts
    1k Views
    olivierlambertO
    +1
  • Xen Orchestra Application XOA Deployment Options/Best Practices.

    5
    0 Votes
    5 Posts
    2k Views
    G
    @karlisi Thanks for the reply. If you go to http://your.xcp-ng.host.ip you will receive web UI OK I understand now - thanks. They are calling community version (from sources) XO and precompiled virtual appliance (paid version) XOA. Thanks for the clarification.
  • Can't delete template

    4
    0 Votes
    4 Posts
    2k Views
    J
    @olivierlambert Okey... it can be deleted from there directly, I don't know why I didn't try that in the first place. Thanks
  • Adding GPU From XO

    10
    1
    0 Votes
    10 Posts
    3k Views
    T
    Hey I just found this topic, did you manage to get the Quadro P400 working in XCP-NG?
  • S3 Backups **APPRECIATION THREAD**

    1
    1 Votes
    1 Posts
    263 Views
    No one has replied
  • Restore Backups from a different XO

    4
    0 Votes
    4 Posts
    1k Views
    S
    Thank you! So I must be doing something wrong as I'm getting the following error when I add in the old NFS mount which has the backups: [image: 1640195910502-dc65c765-1542-4c58-8082-fbb54e33f3c9-image.png] The /mnt/Tank/VMs mount contains the previous XO backups as well as some active VM storage: [image: 1640196114557-680455d2-9559-4fe9-a8a2-127762d5b61b-image.png] FreeNAS has two 10Gbe nics which are isolated based on the type of traffic: 10.10.1.5 is for VM traffic 10.10.2.3 is for Backups/Migration traffic
  • XO Error Loading Health Tab

    5
    1
    0 Votes
    5 Posts
    817 Views
    S
    I can confirm it's now working. Thank You! Health page loads fine w/ the latest commit.
  • Custom templates in hub?

    1
    1 Votes
    1 Posts
    275 Views
    No one has replied
  • constant tasks every few seconds "Xapi#getResource /rrd_updates"

    7
    0 Votes
    7 Posts
    887 Views
    TheNorthernLightT
    @heman Yes. The management interface on each host (Eth4) is in the same vlan as XOA's management interface. Storage vlans on each host (Bond0) is in the same storage vlan as the second interface on XOA (setup for backups) with no gateway.
  • Create virtual network but block internet access?

    3
    0 Votes
    3 Posts
    1k Views
    fohdeeshaF
    @zevgeny Hi, yes this can be easily done by just creating a new network as you described. VMs will be able to access anything in that network/subnet without extra configuration. If they ever need to talk to things outside of that network/subnet (like the internet), they would need a router to route the traffic between subnets
  • LDAP authentication plugin on XOA

    Solved
    4
    0 Votes
    4 Posts
    653 Views
    K
    @olivierlambert Thanks!
  • IMPORT_ERROR after trying to import VM I just exported from XOA

    Solved
    5
    0 Votes
    5 Posts
    908 Views
    P
    @danp Sweet that worked! Thank you!! This things pretty kickass, I was just able to duplicate a VM that was rendering heavy CG to a completely different node and had that duplicate VM rendering in less than 5 mins... Thank you so much for the assistance!
  • Creating support tickets no longer works

    7
    3
    0 Votes
    7 Posts
    1k Views
    Marc.pezinM
    @s-pam Yes indeed, this link is currently broken because of the new support platform. Thanks for the feedback, our team will fix it as soon as possible.
  • Problems building from source

    30
    0 Votes
    30 Posts
    12k Views
    julien-fJ
    @danp It's a warning for an indirect dependency (@vuepress/core > url-loader), I don't think we should worry about it.
  • Stuck tasks after enabling Usage Reporting

    8
    1
    0 Votes
    8 Posts
    1k Views
    R
    @heman Yep, I have a separate storage network from my management network. Thanks for the tip! I will check it out...
  • A Differential Restore in XO failed and I don't know why. Please help

    4
    0 Votes
    4 Posts
    761 Views
    olivierlambertO
    Not your VMs up to date, your XO version. Be sure to be on the latest commit.
  • bug: UEFI boot parameters not preserved with Delta backups

    6
    0 Votes
    6 Posts
    1k Views
    julien-fJ
    Thank you all for your help Please try the fix-uefi-delta-backups branch and keep me posted.
  • Backup/Smart mode broken

    7
    0 Votes
    7 Posts
    771 Views
    julien-fJ
    @andrew It's now fixed, thank you
  • Disaster Recovery Backup - how to restore?

    14
    0 Votes
    14 Posts
    4k Views
    olivierlambertO
    This need to be groomed first. But we are pretty tight this month. Ping @marcungeschikts
  • Some VMs cannot be migrated without first rebooting

    4
    0 Votes
    4 Posts
    770 Views
    DanpD
    I know this has come up before. It may have been in the old XO forum.