XCP-ng 8.3 updates announcements and testing

acebmxer

Same i am continuing to have backup issues.. multiple reboots, disabled NBD backup getting stuck.

Is this the correct procedure to downgrade from the updates?

yum history list | head -n 6
yum history undo <ID> --enablerepo=xcp-ng-testing
reboot
rpm -q xapi-core blktap xen-hypervisor sm

Or do you advise doing - yum downgrade blktap-3.55.5-11.3.xcpng8.3 to just downgrade the blktap?

Edit - Actually looks like diabling NBD might have worked... I thought backup was still runing.. no the full backup completed this time and a scheduled delta job is running.... NBD is enabled on the delta job.

flakpyro

@acebmxer

I was able to revert by running

 yum history list

Finding the transaction from todays updates then running

 yum history undo <id>

I did this on both pools, doing the slaves first then the master. (Reverse order of updating) and so far everything is back to normal.

flakpyro

@acebmxer I was able to run successfully one time after multiple failures. I don't think its consistently reliable. Interesting that disabling NBD helped though. I didn't try that before reverting.

rzr

@acebmxer said:
(...)
yum history undo <ID> --enablerepo=xcp-ng-testing
(...)

Your're lucky ! this is a risky operation we don't recommend to downgrade because some packages like xapi are not handling this properly, prefer other workarounds if there are any (like disabling nbd until @storage team suggest a better option)

Let me thank you again @flakpyro for this regression report it is very valuable to us,

Andrew

@lmolina Updates ran fine, but I'm having CR backup problems too... Mostly ran fine, but I now have 3 stuck with VBD.unplug_force. I can't get them to clear. I'll have to try harder before I revert updates.

flakpyro

@rzr I was worried about this because of XAPI. Luckily i have a host thats not currently running any VMs so i tried it there first hoping it was a small enough change that i could get away with it. Good to know i could have just disabled NBD for now though!

acebmxer

@rzr said:

@acebmxer said:
(...)
yum history undo <ID> --enablerepo=xcp-ng-testing
(...)

Your're lucky ! this is a risky operation we don't recommend to downgrade because some packages like xapi are not handling this properly, prefer other workarounds if there are any (like disabling nbd until @storage team suggest a better option)

Let me thank you again @flakpyro for this regression report it is very valuable to us,

I didn't run the commands I stated. As I was asking first.. I did the command @flakpryo

Of course this is was before i saw your post. As this is the home lab i am fine with if it blows up. but for others this is good to know.

rzr

We have just released security updates for ca-certificates.

Full details are available on the blog:
https://xcp-ng.org/blog/2026/10/22/october-2026-security-updates-3-for-xcp-ng-8-3-lts/

Greg_E

Ok, so what's the scoop here? Safe to roll this out or wait a few days? I just saw the notice in my XO that there are updates and I don't want to wreck my system right now after fixing a few other "issues".

[edit] I see this is just the certificate update so pushing it out and listening to servers reboot.

acebmxer

@rzr

I reinstalled the updates, and confirm backups work with NBD disablled in backup job. - I missed the part about NBD in the notes..

However the task stay at 0% while i can see traffic on my trunas..