VMware migration tool: we need your feedback!

KPS

@florent
Sorry, that was the problem.
I was mislead by the wording "Source VM stopped before the last delta transfer (after final snapshot). Needed to fully transfer a running VM" in the GUI.

KPS

Hi!

I am still struggeling with the VMWare migration tool.

According to the docs, it should be possible to "warm-migrate" a VM, but when I try to, I am getting errors:

"message": "500 Internal Server Error https://vcenter/folder/InetTS00_U20.04/InetTS00_U20.04-flat.vmdk?dcPath=HZ&dsName=OpenE-2_vmware-1_LUN2",

What is the "right" way to migrate a running VM?

florent

@KPS It should, but there are some case where the esxi lock all the files of a VM, and other where it only locks the last snapshot. We're still working on the exact limit, what is the version of esxi used ? what storage do you use ( local VMFS, iscsi, NFS, ... ) ?

In parallel we're putting the finishing touch of a huge change that give a big speedup. that way the penalty of stopping the VM will be lighter. You can test by switching to the branch xva_generation
https://github.com/vatesfr/xen-orchestra/pull/7323

fbeauchamp opened this pull request in vatesfr/xen-orchestra

closed Import disks from ESXi to XCP-ng using XVA format #7323

KPS

@florent
Thank you for your answer. I am using vSphere 7 with iSCSI-storage.
Can you give me a hint on the "most stable" way to migrate?

florent

@KPS the most stable is always to stop the VMs
Trying to warm migrate a running VM between different hypervisor is always tricky, if not brittle, and we work to harden this process, define more clearly the limits and extends the possibilty (for example vsan)

What are the rough sizes of the VMs ? how many VM ? What is the timeframe of the full migration ?

Do you think you can give a try to the xva import on a stopped VM ? on some of my tests, this migration is completely saturating my network link and my disks, as shown in the PR. The fastest way is to have the XO doing the migration directly in the ESXI. As an additional bonus, the disk produced is thin

neologic

When migrating VMs from ESXi, the CPU count and Memory allocation is taken over to XCP-ng.
That's all fine for me.
However, after import, the static min memory allocation cannot be reduced.
Is there a workaround?

[02:56 xcp01 ~]# xe vm-param-get uuid=... param-name=memory-static-min
8589934592
[02:57 xcp01 ~]# xe vm-memory-static-range-set uuid=... min=4294967296 max=8589934592
The dynamic memory range violates constraint static_min <= dynamic_min <= dynamic_max <= static_max.

olivierlambert

If you want to change the min, just change the min not the whole range

neologic

Hello Olivier

Min value is deactivated and not changeable via GUI.

However, I found out, that the static max value can be changed below the currently set static min value. (looks a bit strange to me?)

Example:
before change
=> min 8GB max 8GB
change max value via GUI to 4GB
after change
=> min 4GB max 4GB
Then change the max value to 8GB again.
=> min 4GB max 8GB

Best regards
Thomas

olivierlambert

Yes, because there's no reason to modify the static min. I was asking why are you trying to change the whole range via the CLI.

But first, what do you want to achieve functionally speaking?

neologic

To be able to start with dynamic memory at 4GB (min max) for the Windows Guest.
And then if needed, to be able, to expand to 8GB (min max) on the fly.
However, it seems, that the Windows Guest (2022 Server) always sees static max correct?

olivierlambert

Do you really need dynamic memory? I would prefer to avoid it if you can. Each migration will deflate the VM to the dynamic min, which is a cause of a lot of crashes and migration issues (if not taken into account, eg dynamic too low vs current usage). Keep it with static as far as possible.

neologic

Ok. Thank you for the advise.
Will follow as recommended.
Best regards

Riven

Any plans to check how many vNICs there are and allow us to map each one correctly.

All of our vmware VMs have multiple vNICs and are in different port-groups.

Its not a major hassle to change them post-migration - just a nice-to-have.

olivierlambert

You mean to map each VIF to each Network of your choice?

Riven

@olivierlambert - Yes, so when we do a V2V there is only 1 VIF listed to put the migrated VIFs in to, even if the VM has 5 VIFs

Is it possible to query each vmx and allow us to select a 'network' for each VIF that it has?

olivierlambert

Question for @florent

florent

@Riven said in VMware migration tool: we need your feedback!:

@olivierlambert - Yes, so when we do a V2V there is only 1 VIF listed to put the migrated VIFs in to, even if the VM has 5 VIFs

Is it possible to query each vmx and allow us to select a 'network' for each VIF that it has?

not for now

rtjdamen

@olivierlambert I wanted to comment on this topic, we have migrated around 450 vms in 3 months using this feature, it really was a game changer and without it we were never able to make the step to XCP-NG. during the migration process we saw the feature being improved, overall speed and reliability were great. Compliments on this feature and i think it will help a lot of future customers migrating to XCP-NG.

tcp_len

Migration fails, here is the raw log;

{
  "id": "0lxdi3kqv",
  "properties": {
    "name": "importing vms 14",
    "userId": "9045a9e7-f9b2-44fd-81e9-02c1ea88b37b",
    "total": 1,
    "done": 0,
    "progress": 0
  },
  "start": 1718297723335,
  "status": "interrupted",
  "updatedAt": 1718298405138,
  "tasks": [
    {
      "id": "c3bsox2ydxp",
      "properties": {
        "name": "importing vm 14"
      },
      "start": 1718297723339,
      "status": "pending",
      "tasks": [
        {
          "id": "lvtzb0k3sc9",
          "properties": {
            "name": "connecting to 10.x.x.12"
          },
          "start": 1718297723341,
          "status": "success",
          "end": 1718297723756,
          "result": {
            "_events": {},
            "_eventsCount": 0
          }
        },
        {
          "id": "n6tsha4ebu",
          "properties": {
            "name": "get metadata of 14"
          },
          "start": 1718297723756,
          "status": "pending"
        }
      ]
    }
  ]
}

Danp

@tcp_len We recently released a Vmware migration checklist that you can view here -- https://help.vates.tech/kb/en-us/37/133

Frankly, that log doesn't give us much to go on so you will need to provide more details if you want further assistance, ie:

ESXi version
Type of datastore
Version of XOA or current commit if using XO from sources
XCP host version; fully patched?
Warm or cold migration?
Does the VM have any snapshots?
etc