XCP-ng 8.3 updates announcements and testing

ph7

@ThierryEscande
Ran some tests for 20 min
Seems to work fine

[18:39 x1 ~]# ethtool -i eth0
driver: e1000e
version: 5.10.179
firmware-version: 0.13-3
expansion-rom-version: 
bus-info: 0000:00:19.0
supports-statistics: yes
supports-test: yes
supports-eeprom-access: yes
supports-register-dump: yes
supports-priv-flags: yes

Andrew

@ThierryEscande I ran the update and it's passing good data (on an older card that worked before).

Greg_E

I finally got my lab updated and the two vms started, so far so good. Stats data is present, the first time I've seen any of my hosts pull 100% CPU. Hosts are little HP T740 thin clients with AMD V1756B processors and 64GB of ram, in a 3 host pool.

Sorry I can't bring more detail, not really doing work on my XCP lab right now, and lots of shake up around tech. space at work.

stormi

So, we owe a very big thank you to everyone here for your tests and feedback. The numerous updates that were in the xcp-ng-testing repository are now officially published to everyone:

https://xcp-ng.org/blog/2025/05/26/may-2025-maintenance-update-for-xcp-ng-8-3/

But stay with us, as very soon we'll have a few more updates to test, as well as refreshed installation ISOs!

flakpyro

@stormi Installed on our 2 production pools, DR and remote sites, 46 hosts total ranging from Dell, Lenovo, HP, and Supermicro servers, no issues to report!

stormi

Just a heads-up to let you know that we'll soon (tonight? Tomorrow?) upload pre-releases of the refreshed installation ISOs for XCP-ng 8.3.

bufanda

@stormi Oh Damn, bad timing I shouldn't have updated my 8.2 pool last sunday

stormi

A few days late because internal tests led to a few fixes, here are the pre-release ISO images for a refreshed XCP-ng 8.3 installer:

https://repo.vates.tech/tmp/

$ cat SHA256SUMS
22deae59e7c5cff7d4691c447af9dbf27b29a372748c1844c280bdc212ef2a5f  xcp-ng-8.3-20250606-linstor-upgradeonly.pre3.iso
9a5dcc8d98949ee207d28307b8b94320d1ffd24841e34ca74e1c0f0422e5ecab  xcp-ng-8.3-20250606-netinstall.pre3.iso
4d6f5a99da0d70920bc313470ad2b14decab66038f0863ca68a2b81126ee2977  xcp-ng-8.3-20250606.pre3.iso

No need to upgrade XCP-ng 8.3 with these. It is not a new release. It's refreshed installation images, with all updates included.
When we release them, at the same time, XCP-ng 8.3 will be officially labeled LTS. Again, the existing XCP-ng 8.3 that you already use. Not a new XCP-ng release.
This is also when XOSTOR becomes officially supported in XCP-ng 8.3 .
8.2 to 8.3 upgrade with XOSTOR required a specific treatment, to get a compatible LINSTOR version installed on upgrade. This constraint we had to handle was caused by Linstor not supporting rolling upgrade. For this, we provide a dedicated upgrade ISO (-linstor-upgradeonly). After the upgrade, if there are available updates in 8.3 for linstor, then you can follow the usual update process (which also contains specific steps for XOSTOR such as updating linstor-satellite first on all hosts and restarting the services on all of them, still due to linstor not supporting rolling update. That's something that XOA's RPU handles automatically since a few releases, by the way).
Some packages are slightly newer in the ISOs than in 8.3's update repositories. The only reason is because I didn't want to push updates so soon right after the previous batch, so that XOA doesn't tell you that you are outdated and need to update. But of course these updates will also come to existing XCP-ng 8.3 hosts soon. They're not just for the ISOs.
The netinstall ISO image will pull the original 8.3.0 packages at the moment, so if you want to use it you first need to create a netinstall reposistory somewhere by extracting the full installation ISO, and point at it.

Regarding testing we are interested on all kind of feedback. Installations, upgrades with and without XOSTOR, and everything you want to test that seems pertinent to ensure there are no regressions when compared to the original 8.3.0 installation ISOs.

gb.123

@stormi said in XCP-ng 8.3 updates announcements and testing:

A few days late because internal tests led to a few fixes, here are the pre-release ISO images for a refreshed XCP-ng 8.3 installer:

https://repo.vates.tech/tmp/
$ cat SHA256SUMS
22deae59e7c5cff7d4691c447af9dbf27b29a372748c1844c280bdc212ef2a5f  xcp-ng-8.3-20250606-linstor-upgradeonly.pre3.iso
9a5dcc8d98949ee207d28307b8b94320d1ffd24841e34ca74e1c0f0422e5ecab  xcp-ng-8.3-20250606-netinstall.pre3.iso
4d6f5a99da0d70920bc313470ad2b14decab66038f0863ca68a2b81126ee2977  xcp-ng-8.3-20250606.pre3.iso
No need to upgrade XCP-ng 8.3 with these. It is not a new release. It's refreshed installation images, with all updates included.

When we release them, at the same time, XCP-ng 8.3 will be officially labeled LTS. Again, the existing XCP-ng 8.3 that you already use. Not a new XCP-ng release.

This is also when XOSTOR becomes officially supported in XCP-ng 8.3 .

This is definitely the best part... I just installed XCP-NG on my test bench (a few days back) with the previous ISOs to test the updates !
Will try this ISO as soon as I get my new PC!
Was eagerly waiting to try XOSTOR in the meantime.

Greg_E

@stormi

With 8.3 becoming LTS, what happens to 8.2.x? How long will it still receive security updates?

Trying to decide if this is a drop everything and upgrade moment, or if there is some time available before upgrading is required. While my 8.3 lab has been solid since switching (disregarding user created problems), I'm not sure I want to go through an 8.2 to 8.3 upgrade right now.

Also with 8.3 going LTS, does this mean that a 9.x Beta will be available soon? It looks like Alma just released v10 which I've read is going to be the basis for XCP-ng 9.x, or is this still a mountain of work to overcome to get to a Beta? The newer kernel functions like the NFS options is something I'm looking forward to testing.

olivierlambert

Hi,

We wrote some explanations in this blog post: https://xcp-ng.org/blog/2025/03/14/the-future-of-xcp-ng-lts/

Greg_E

@olivierlambert

So is that June 25, 2025 or 3 months from now as the drop dead date?

john205

@Greg_E neither. 8.2 is still LTS currently! They haven't switched it yet, but presumably it will be soon!

gduperrey

This will be three months after the official release of 8.3 LTS.

The release should take place in a few days when we release the ISO currently available for testing.

It's what is described in the "What to expect" part of the blogpost given above:

Guaranteed overlap period – There will be at least three months where both XCP-ng 8.2.1 and XCP-ng 8.3 LTS will be supported simultaneously, ensuring organizations can transition smoothly.

Greg_E

@gduperrey

OK, 3 months is good because I'm in a nasty bind right now and this may need to wait until August. I would expect many other places to have the same issues.

gb.123

This post is deleted!

olivierlambert

@gb.123 Hi, please open an issue on https://github.com/vatesfr/xen-orchestra/issues and ideally provide a screenshot or a detailed description of the problem. Thanks!

gb.123

@olivierlambert
Sure.

stormi

said in XCP-ng 8.3 updates announcements and testing:

here are the pre-release ISO images for a refreshed XCP-ng 8.3 installer

Last call

JeffBerntsen

@stormi I just used them to upgrade the 8.2.1 systems in my test pool. All seems fine so far.