1. Home
  2. Xen Orchestra

Subcategories

  • VMs, hosts, pools, networks and all other usual management tasks.

    330 Topics
    2k Posts
    olivierlambertO
    Keep us posted if you are stuck again, let us know

  • ACLs, Self-service, Cloud-init, Load balancing...

    84 Topics
    707 Posts
    CyrilleC
    @ferrao Yes it is. At the end the task disappears unless there is an error / failure.

  • All XO backup features: full and incremental, replication, mirrors...

    337 Topics
    3k Posts
    olivierlambertO
    Before answering your question, that would be good to get already something to compare. Can you try with XO and see if it's similar? It's important to understand, if the problem is related to XCP-ng or your backup solution. Also, why not asking CommVault directly too?

  • Everything related to Xen Orchestra's REST API

    61 Topics
    476 Posts
    S
    @Studmuffn1134 I changed my link from ws:// to https:// and it now gives me this error File "Z:\Valera\School\Lakeland University\Finished\Programming 2\Python Programs\StudsPrograms.venv\Lib\site-packages\jsonrpc_base\jsonrpc.py", line 213, in parse_response raise ProtocolError(code, message, data) jsonrpc_base.jsonrpc.ProtocolError: (10, 'invalid parameters', {'error': {'message': 'invalid parameters', 'code': 10, 'data': {'errors': [{'instancePath': '/id', 'schemaPath': '#/properties/id/type', 'keyword': 'type', 'params': {'type': 'string'}, 'message': 'must be string'}]}}, 'id': '0a11ec72-9300-4030-a5d2-a5c0286f3811', 'jsonrpc': '2.0'})

  • Terraform, Packer or any tool to do IaC

    31 Topics
    281 Posts
    olivierlambertO
    Question for @dinhngtu
Log in to post
Load new posts
  • M

    configure shared storage for VM for SQL Server Cluster

    10
    0 Votes
    10 Posts
    2k Views
    F
    @olivierlambert is there a way to mount the same disk in two VMs in RW mode? I have a lab that uses pacemaker inside the VM's and pacemaker handles the mounting/access of the volumes. I have a working setup on oVirt using the "Shareable" option of a Virtual Disk. So I can attach to multiple VM's simultaneously. Is there anything similar on XCP-ng? Even if I have to hack through the command like to attach? Thank you.
  • daemogarD

    Cannot start Xen Orchestra Quick Deploy Appliance

    Unsolved
    3
    0 Votes
    3 Posts
    467 Views
    D
    @fffeee the underlying storage repository is disconnected from the Host. It would likely be better to open a new topic to discuss in detail, as there are a variety of reasons as to why this could happen that are going to be case specific to your issue.
  • C

    Can not create a storage for shared iso

    3
    1
    0 Votes
    3 Posts
    200 Views
    C
    @Tristis-Oris thank you
  • C

    XOA is allways halted after the machine is rebooted

    8
    0 Votes
    8 Posts
    498 Views
    C
    @splastunov said in XOA is allways halted after the machine is rebooted: xe vm-param-set uuid=<vm_UUID> other-config:auto_poweron=true Thank you very much for detailed reply. It worked. All the best
  • X

    Unable to add a Host to Xen Orchestra - no errors

    7
    4
    0 Votes
    7 Posts
    890 Views
    DanpD
    @Xelosu FWIW, the log entries related to xo-server-test are benign and should be ignored.
  • D

    how to get syslog to remote to work?

    4
    0 Votes
    4 Posts
    1k Views
    lawrencesystemsL
    @djingo My syslog stopped working (I think after one o the updates) and this bug still exists. If you trying removing it form the Pool or individual hosts in the Pool via XO it will not let you have it as blank. If you ssh in and use xsconsole you can remove the syslog server and but it will not let you specify a port. But once it has been removed from xsconsole you can go back into XO and add in the syslogserver along with a non-default port such as 192.168.2.7:1521 and it will work.
  • J

    Xen Orchestra & XO Lite PWA Manifest

    xenorchestra xolite pwa manifest iconography
    10
    0 Votes
    10 Posts
    886 Views
    J
    @pdonias said in Xen Orchestra & XO Lite PWA Manifest: Thank you @john-c! We need to make a few changes first, we'll take care of your PR right after that As a result of taking such a long time to get around to reviewing and merging my PR. The base for my contribution got really out of sync so I had to discard the changes and rebase. This meant the PR got closed a new one was needed. The Old PR with branch was really out of sync and with several lots of conflicts. https://github.com/vatesfr/xen-orchestra/pull/7445 So please do this new one during today or tomorrow so that the rebasing isn't needed again! MrGrymReaper opened this pull request in vatesfr/xen-orchestra closed xo-web Initial PWA manifest for Xen Orchestra 6 #7445
  • E

    Adding OS Logo to XenOrchestra Home

    8
    0 Votes
    8 Posts
    515 Views
    E
    i found this lines of code (ex. mint) in the other topic (https://xcp-ng.org/forum/topic/4583/adding-os-logos/14?_=1709647941739) on the right side my version as ex. NAME="Linux Mint" VERSION="20.1 (Ulyssa)" ID=linuxmint ID_LIKE=ubuntu PRETTY_NAME="Linux Mint 20.1" VERSION_ID="20.1" NAME="Scientific Linux" VERSION="7.2 (Nitrogen)" ID=scientificlinux ID_LIKE=redhat PRETTY_NAME="Scientific Linux 7.2" VERSION_ID="7.2" do i forgot to add some more lines like those (up) for e.x. ?
  • L

    fatal error while updating XOA (installed from source)

    9
    0 Votes
    9 Posts
    884 Views
    L
    @stormi Thanks for your answer. I'll give a try later, bypassing the PFBlocker module of the router. Github is not currently on any blacklist, but I block Digital Ocean and some others who host many attackers.
  • M

    Problem importing ANY ESXi VMDK into Xen Orchestra CE

    26
    1
    0 Votes
    26 Posts
    6k Views
    nikadeN
    @Mathieu said in Problem importing ANY ESXi VMDK into Xen Orchestra CE: Just experienced the same issue with a few VMs I imported from VMware. I think it's a Windows issue, from what I can tell. The network adapter type changes after the import in xcp-ng (from VMXNet to XenServer PV), that's normal. Windows do not allow the same IP address to be used automatically for a different type of network adapter, so that's why it reverts to DHCP with the new adapter. You can see that by setting the previous static IP address in the new adapter, it will warn you that the address was used with a previous adapter and asks for confirmation. https://learn.microsoft.com/en-us/troubleshoot/windows-server/networking/error-message-when-you-set-ip-address No idea if there's a way to avoid that. Yeah same, we're also using VMXNET. When trying to do this manually there's a popup which you have to accept to "force" having the same IP on multiple interfaces. Im sure the IP's are save in registry so deleting the post as part of the process would probably resolve it.
  • K

    Error on attempting delta backup -- how to rectify?

    6
    0 Votes
    6 Posts
    359 Views
    K
    @Danp Aww. see that box. Let me look into this problem a bit more. Learning some new things here.
  • JamfoFLJ

    New VM Creator drop-down is not working

    Solved
    13
    0 Votes
    13 Posts
    577 Views
    JamfoFLJ
    @julien-f Agreed... I will add (just for future reference) that I did confirm that I was on the very latest versions of xo-server at the time... in fact, I made sure to apply all updates and reboot the Xen server before submitting the ticket. Nothing seemed to work... even multiple reboots, etc. Once @Danp made mention of the Nodejs version and I updated from v18.18.2 to v18.19.1 everything immediately started working. I made no other changes after applying the Nodejs update. So while that may not have been the cause, it somehow fixed whatever was ailing me. I have no explanation either, other than the fact that making that change is what took me from the feature not working to the feature working.
  • jedimarcusJ

    XO Dev Setup

    2
    0 Votes
    2 Posts
    149 Views
    florentF
    @jedimarcus yarn dev start only the watcher(s) you can start the server by using cd packages/xo-server and then yarn start you can use nodemon instead of node if you want autoreload
  • J

    unknown error from the peer

    3
    0 Votes
    3 Posts
    819 Views
    J
    @Danp Yes. I have 3 VMs on this host plus the XOA. All using the same eth1. I'm able to reach https://xen-orchestra.com/ from the network and other VMs. Although in the Internet connectivity: Error: above it is being directed to non SSL connection. Could it be that the registration cannot handle redirects? JB
  • J

    License bind to ?????

    5
    1 Votes
    5 Posts
    430 Views
    J
    @Danp Interesting. Now I have to try it! Thanks, JB
  • olivierlambertO

    Webhooks in Xen Orchestra

    18
    0 Votes
    18 Posts
    2k Views
    D
    I'll be looking to setup webhooks to push backup logs to our SOC audit platform (tugboat), ideally on the weekly jobs.
  • A

    Unable to quick deploy XOA on 8.2.1

    7
    1
    0 Votes
    7 Posts
    667 Views
    A
    Confirmed working with the new version.
  • D

    Servers: connection failed, Invalid XML-RPC message / Error with plaintext password

    Solved
    17
    1
    0 Votes
    17 Posts
    3k Views
    E
    @AtaxyaNetwork Sorry, user error. I wasn't clicking and selecting the SR that was created for the ISO
  • robytR

    New xoa: unable to login

    Solved
    5
    0 Votes
    5 Posts
    267 Views
    olivierlambertO
    Thanks for your feedback!
  • S

    After update xen orchestra web gui is not working

    10
    1
    0 Votes
    10 Posts
    900 Views
    S
    @olivierlambert said in After update xen orchestra web gui is not working: ean you can't open a okkkk thank you